UPS Accessories

Powertecnique supply a wide range of Simple Network Management Protocol (SNMP) adapters, USB converters, duplexers and protocol converters to expand the communications capabilities of Powertecnique UPS and provide ease of management across networks and multi operating platforms.

NETMAN 101/102

The NetMan network agent allows UPS management across a LAN using any of the main network communication protocols - TCP/IP, HTTP and network interface (SNMP). NetMan enabled UPS integrate easily into medium and large sized networks and provide reliable communications between the UPS and management systems employed.

configured via TELNET or a serial terminal
compatible with UPSMon V 5.0 and PowerNETGuard monitoring and control software
integrated Web server for browser-based display
Telenetguard modem compatible
firmware upgradeable through the serial port.
support's the network interface (SNMP) standard communication protocol with proprietary RFC 1628 and MIB

MULTICOM 301/302

The MultiCOM 301/302 protocol converter may be used to monitor the UPS using the MODBUS/JBUS protocol on RS485 or RS232 serial lines. It will also manage a second, independent RS232 serial line that can be used to connect other devices such as the Netman 101 or a PC that uses the PowerShield software.

configuration of the port for MODBUS/JBUS as RS232 or RS485
management of two independent serial lines
suitable for integration with Building Management Systems (BMS)
LED signaling of the communication flow
firmware upgrade able through the serial port.

MULTICOM 351/352

The MultiCom 351/352 is a serial duplexer that allows two devices to be connected to a single serial port on a UPS. It can be used where numerous serial connections and multiple polling of UPS are required, and is ideal for LAN networks with a firewall.

cascading configuration giving a maximum of 4 serial ports
LED signaling of the communication flow
firmware upgrade able through the serial port.

MULTICOM 362 SERIAL/USB PORT

MultiCOM 362 provides a UPS with an additional RS232 serial interface or USB port. The USB port allows the UPS to communicate with Apple Macintosh computers as well as Windows and Linux operating systems.

compatible with USB 1 or 2
compatible with UPSMon v 5.0.

MULTICOM 372 SERIAL/ESD PORT

MultiCOM 372 provides a UPS with an additional RS232 serial interface port. The card has Emergency Power Off (EPO) and Remote Shut Down (RSD) inputs with terminal connections.

EPO and UPS shutdown interface
12Vdc 80mA contact option

MULTICOM 382 CONTACTS/ESD BOARD

MultiCOM 382 provides a set of relay contacts to provide UPS alarm and status indication. The contacts are connected through terminal connections. Signal contacts include Emergency Power Off (EPO), Remote Shut Down (RSD), On Battery, On Bypass, Alarm and Low battery. The contacts are change over or normally open.

max. 3A current at 250Vac
signal contact customisation.

MULTI I/O

The Multi I/O device integrates the UPS with control systems with complete configurability of the input and output signals.

8 analog/digital inputs
8 relay outputs configured using the UPS and input status
may communicate with the UPS via RS-232
can control 2 independent serial lines RS232/RS485 to monitor the UPS and the device itself with the Modbus/Jbus protocol.

USB CONVERTER

The RS232-USB converter allows UPS without a USB port to connect to Macintosh, Windows and linux PCs with this type of port.

compatible with USB 1.2
compatible with UPSMON V 5.0

MULTIFUNCTION I/O SERIAL LINK/CONTACTS DUPLEXER

Multifunction I/O is a NAOS range accessory with which you can associate the battery operation, bypass, alarm and battery depleted status reports with dry contacts (maximum current 8A/250V). The accessory also has an input which is used to set up the configurable remote on, remote off and remote on/off functions through the UPSTools software (vers. 1.3.3 or higher). The functions are provided for UPS with firmware version SWM020-01-16 or higher.

max. current 8A at 250Vac
possibility of configuring the signal-to-contact
associations pass-through serial link for PC connection.

PROFIBUS CONVERTER PROTOCOL CONVERTER

The Profibus Dp Gateway is an accessory with which you can connect a UPS to a Profibus DP network. With this device management and monitoring of the UPS can be integrated in a control system based on one of the field buses most widely used in industry for communication between control/automation systems and distributed I/O.

PROFIBUS DP-V1 Protocol.
Configurable address from 1 to 126.
Configurable baud rate from 9.6 kBaud to 93.75 kBaud
LED reporting the communication flow.

KIT FOR AS400 AND I-SERIES COMMUNICATION KIT

The IBM AS/400 has a single-level memory management feature that makes it compulsory for the system to be shutdown in a controlled and orderly manner. Without UPS protection an AS/400 is not protected from mains failures. A momentary loss of power can cause hardware damage, data corruption and a lengthy reboot period. The Powertecnique UPS AS/400 interface kit allows a UPS to be connected to the AS/400 to initiate an orderly system shutdown on mains failure

compatible with all AS/400 systems
supports all the Powertecnique UPS ranges.